What are framing nails?
Framing nailer nails are heavy-duty fixings used to join timber during the first fix stage of construction, doing a lot of the heavy lifting for the framework.
You’ll see them used a lot for timber frames, stud walls, roof structures, joists, and flooring, where a strong, secure connection is needed. Most jobs require hundreds of them, so they come collated in strips and are fired from a nail gun rather than hammered in by hand.
Unlike smaller finishing nails, first fix nail gun nails are designed for heavier timber applications and come in collated strips, letting you drive multiple nails quickly without loading them individually. That way, you can get tasks done quicker.
For lighter finishing work, such as skirting boards, architraves, and decorative trim, take a look at our brad nails instead.
Clipped D-head vs round-head framing nails
Framing nails typically come with a choice of two heads: clipped D-head and round-head framing nails.
Clipped head nails (also known as D head nails) have part of the head cut away, leaving a D shape that allows the nails to sit closer together in a collated strip. That means you get more nails per strip and can fix them closer together without the heads overlapping, for fast, repetitive timber fixing.
Round-head framing nails have a fully circular head with a slightly bigger bearing surface against the timber. We sell clipped-head framing nails, but some structural specifications require full round heads, so check your drawings or the engineer’s requirements before ordering.
Paper collated vs plastic strip
Our 34-degree framing nails use paper collation, which holds the nails in angled strips.
Paper produces less loose debris than plastic collation and can help reduce problems caused by broken plastic strips, such as mess and jams.
Our paper-collated framing nails are taped at 30–34°, so when the nail gun fires, the paper is driven safely into the wood with the nail, acting as an anti-jam mechanism and leaving a clean finish.
Plastic collated nails typically come in strips angled around 20–22° and can leave small plastic pieces behind when fired, so wearing eye protection is important. Always check your nail gun’s angle before buying, as 34-degree nails won’t fit a 21-degree magazine.
Ring shank vs smooth shank
Ring shank framing nails have ridges along the shank that grip the timber fibres and resist pull-out far better than smooth nails.
Our ring shank nails come in 2.8 x 50mm, 2.8 x 63mm, and 3.1 x 75mm sizes, making them a good fit for sheathing, sarking, subfloors, and anything that could work loose over time.
We also sell smooth shank nails, such as our 3.1 x 90mm framing nails, which are easier to drive and are commonly used for general timber framing. They provide enough friction for a solid hold, while the smooth profile lets the nailer drive them fully into thick, dense timbers without excessive resistance.
Galvanised or stainless steel?
Our electro-galvanised framing nails are best for dry internal work where the timber stays dry, such as stud walls and roof voids.
They are Service Class 2, and their zinc coating offers some corrosion protection, but galvanised framing nails aren’t suitable for general-purpose outdoor fixing.
For exposed timberwork, our stainless steel framing nails offer better corrosion resistance. Use A2 stainless steel nails for external applications or for pressure-treated timber, oak, or cedar. They’re A2 grade and rated Service Class 3, so they’re suitable for external and coastal work, and they won’t leave rust streaks down the timber.
For heavier exterior structural support, you might also want to look at our coach screws & bolts or decking screws.
Framing nail sizes
| Nail size | Shank type | Box quantity | Typical applications |
| 2.8 x 50mm |
Ring |
3,300 galvanised / 1,100 stainless |
Cladding, thin battens, fencing |
| 2.8 x 63mm |
Ring |
3,300 galvanised / 1,100 stainless |
Roof battening, general framing |
| 3.1 x 75mm |
Ring |
2,200 galvanised |
Securing floorboards, heavy fencing, stud walls |
| 3.1 x 90mm |
Smooth |
2,200 galvanised / 1,100 stainless |
2x4/47mm studwork, joists |
For standard 47 x 100mm studwork (the UK equivalent of a 2x4), most carpenters use 90mm framing nails to fix through the plate into the end of a stud.
Which nail guns are they compatible with?
Our nails are designed to work with most major 34° gas, cordless, and pneumatic first-fix nailers, and they work in most Paslode-style 34° tools.
We always advise checking your specific tool manual to confirm it accepts 34° clipped D-head paper collated nails before you order.
Buy framing nails at trade prices
Whether you’re stocking up for a big framing job or just need a few boxes, we offer competitive bulk pricing across 1–4, 5–9, and 10+ boxes, so the more you order, the better the price.
With UK delivery and free delivery on qualifying orders over £150 + VAT, it’s straightforward to get your fixings sorted.
FAQs
What nails do you use for framing?
For structural timber framing, you need heavy-duty first-fix nails.
Ring shank nails offer better withdrawal resistance for studwork, while smooth shank nails are often used for general framing, like sheathing and boarding.
What size nails for framing in the UK?
For standard 2x4 (47mm) stud walls, 90mm smooth-shank nails are the most common choice, as they provide deep, secure penetration.
For thinner timber like roofing battens, 50mm framing nails or 63mm ring shank nails are best.
What is the difference between framing nails?
The main differences are head type (clipped or round), collation (paper or plastic), collation angle, shank (ring or smooth), and finish (galvanised or stainless).
Framing nails are generally heavier-duty fixings for structural timber connections, while collated framing nails come in strips for rapid installation with a nail gun, and loose nails are driven individually.
Can I use galvanised nails outdoors?
Electro-galvanised nails are rated Service Class 2, so they’re fine for sheltered spots but not fully exposed timber, as they have limited corrosion resistance.
For external work, treated timber, or coastal sites, use A2 stainless steel instead.