What are straight stainless brad nails used for?
16g stainless steel brad nails are a practical choice for second-fix and finishing work where nails may be exposed to moisture, or when working with timber that requires stainless steel fixings.
Use them to install skirting boards, architraves, mouldings, and for timber trim work. Their Service Class 3 stainless steel specification also makes them suitable for outdoor, damp, and exposed applications, as well as use with oak and other tannin-rich timbers.
The concealed T-head creates a less noticeable finished fixing, while the reduced-split design prevents splitting and surface damage.
Browse our full range of brad nails, find other sizes and fixing types in our wider range of collated nails, or see our collated drywall screws for plasterboard fixing jobs.
Stainless steel brad nails: specifications
- Gauge: 16G, approximately 1.6mm
- Head: Concealed T-head design
- Collation: Straight strip
- Available lengths: 25mm, 38mm, 50mm and 64mm
- Pack quantity: 2,000 nails
- Finish: A2 stainless steel
- Service Class: 3
- Applications: Indoor and outdoor trim work
Which nailers do these 16-gauge stainless steel nails fit?
These stainless brad nails fit most 16G straight brad nailers, including compatible models from Tacwise, Milwaukee, and DeWalt.
Always check your tool before ordering to make sure it accepts straight-collated 16G nails and supports your chosen nail length. Remember that maximum fastener capacity can differ between nailers, even when they use the same gauge.
Stainless or galvanised brad nails?
Galvanised Service Class 1 nails are designed for dry internal conditions, while these Service Class 3 stainless steel nail gun nails are suitable for indoor, outdoor, damp, and exposed conditions.
Also choose stainless steel Service Class 3 nails when working with oak and other tannin-rich timbers.
FAQs
When should I use stainless steel brad nails instead of galvanised?
Use stainless steel nails when working on outdoor applications or in damp conditions, such as bathrooms and kitchens that are exposed to more moisture.
These nails are Service Class 3, whereas the galvanised nails are Service Class 1 and intended for dry internal applications.
You should also use stainless steel nails for oak and other tannin-rich timbers, as tannins naturally present in some woods can react with unsuitable metal fixings and cause dark staining around the fixing point.
Are these brad nails suitable for outdoor use?
Yes. These stainless brad nails are Service Class 3 and are suitable for both indoor and outdoor applications, including jobs where the fixings may be exposed to damp conditions or the weather.
What is A2 stainless steel?
A2 stainless steel is a widely used stainless steel grade for fixings designed for outdoor use.
It’s needed where greater resistance to moisture and environmental exposure is required, more than a standard electro-galvanised fixing can provide.
